Showing 1–21 of 59 results

  • In Stock

    The Charge – Universal Rechargeable Sight Light

    NEW SOFT BLACK CAP

    NEW FEATURE: 15 MINUTE BUILT IN TIMER!

    • Rechargeable 3-Stage Universal Sight Light
    • Universal Fitting – 1/4 – 28, 7/16 – 20, 3/8 – 32
    • Rechargeable via Micro USB (cord included)
    • Long-lasting and Durable
    • 3 Stages of Brightness: Low, Medium, High
    • Bright UV LED Light
    • Waterproof
    • Turn on and off by the press of a button

     

     

    If you have any questions, or need more information before purchasing, please contact us at info@viperarcheryproducts.com.

    $24.99
  • In Stock

    Razor Pin

    • Razor Edge Pins
    • Thin and Durable
    • Slotted to Keep Fibers Protected
    • Available Pin Sizes: .010, .015, .019
    • Available Colors: Blue, Green, Red
    • Sight Housing Variations: 
      • Driver/Venom Housings – Will have the removeable track as shown in picture.
      • Diamondback/Old Venom Housings – Will have no removeable track as shown in picture.
    • Not sure what housing you have?  Please refer to the pictures listed. If you still need assistance, please reach out to us at viperarcheryproducts.com.
    $18.99
  • In Stock

    Dovetail Riser Stabilizer

    Introducing our New Dovetail Riser Stabilizer

    • 4.oz Powder coated Steel weight
    • Coil Rubber dampener to remove bow shock
    • All aluminum construction
    • Available in 8”, 10”, 12” Lengths
    • Set Screw Knob Included

    Want to add more weight? Follow the link below: https://viperarcheryproducts.com/product/stabilizer-stub-screws/

    $69.99$89.99
  • In Stock

    Replacement Fiber – 3 Pieces | 12″ Each & One Piece 5 Feet

    • Replacement Fiber Optic
    • Comes in three 12 inch Sections or 5 feet of Fiber
    • Colors: Green, Red, Blue, Yellow
    • Sizes: .010, .015, .019, .029
    • NOTE: The .029 fibers will only fit the old style razor pins that fit into the Viper H500 and Package Bow Sight Housings. The .029 fibers will not fit into the razor pins that go into the Venom or Diamondback Sight Housings. Please contact us at info@viperarcheryproducts.com for more information.
    $11.99$19.99
  • In Stock

    Competition and Machined Style Up-Pins

    • Single Pin
    • Choice between Competition or Machined Up Pin
    • Designed to fit Viper Scopes, Sidewinder, and Sidewinder XL Sights
    • Sizes: .010, .015, .019
    • Fiber Colors: Blue, Green Red
    • Made in USA
    $18.99$26.99
  • In Stock

    X-Strike Target Stabilizers

    • Lightweight
    • Stiff Carbon Rod
    • Comes with 2, 1oz Steel Weights
    • Matte Minish
    • Sizes 6″, 8”, 10”, 12”, 14”, 18”, 20”, 24”, 28“, 30”, 33″, 36″
    $54.99$129.99
  • In Stock

    Sun Shade

    • Helps eliminate unwanted brightness and glare
    • 1 3/4″ Diameter
    • 1 3/8″ Diameter – Fits Small Viper Scopes
    • Machined from 6061 T6 Aluminum
    • Made in the USA
    $24.99
  • In Stock

    Viper Scope Sight Light Bracket

    Easily install the Sight Light of your choice to a Viper Scope

     

    • Fits our small Viper Archery Scope – 1 3/8″ and our large Viper Archery Scope 1 3/4″
    • Sight Light thread is 1/4-28
    • Includes bracket and mounting screw.
    • Options to purchase with a sight light.

    (Picture shown with The Charge – Rechargeable Sight Light)

    Note – This Bracket will only apply light to the side of the fiber, not the end. Please see below for more information.

    IMPORTANT INFORMATION ABOUT FIBER COLORS:

    If you’re looking to use all three LED colors to change the color of your pin, you will need to use either a clear or blue fiber. Both of these fibers will light up the color that is selected on the light (either red, green, or blue). However, it is important to note, that to do this, the LED light must be applied to the END of the fiber. Clear and blue fiber will NOT gather LED light if it is applied to the side of the fiber. Please ensure that your set-up has a way of applying light to the end of the fiber if you are looking to do this.

    If choosing clear fiber, it must be used with a sight light as it will not gather ambient light. Blue fiber will gather some ambient light and can also be used with a UV sight light (like “The Charge” rechargeable sight light) if just a brighter blue is desired.

    If using the Charge Plus with standard red or green fiber,  the light can be applied to the side of the fiber. The blue color LED setting works best for this application.

    $15.00$37.99
  • In Stock

    3 Stage Ultra Violet Sight Light

    • Easily add light to your pins
    • Universal Fitting – 1/4″-28, 7/16″-20, 3/8″-32
    • Ultra Violet Light
    • 3 Stages of Brightness

     

    $12.99
  • In Stock

    Lens Kit, Retainer Ring And O-Ring

    Easily install the lens of your choice using the Lens Kit for Viper Scopes, Sidewinder, Pit Viper, or Atrox with a Single/Double Up Pin Housing

    Kit Includes: Retainer Ring, O-Ring, and your choice of a Viper Lens.

    Viper Ziess Coated Lens

    • 1 3/4” Housing Diameter
    • 1 3/8” Housing Diameter – Fit Small Viper Scopes
    • Available Lens Power: 2x, 3x, 4x, 6x

    Retainer Ring

    • Machined from 6061 T6 Aluminum
    • Made in the USA

     

     

    • Not sure which Lens Kit to purchase? Please contact us at info@viperarcheryproducts.com.
    $94.99
  • In Stock

    ZEISS-Coated Lenses

    • Zeiss-Coated
    • Quality Design for Optimal Performance
    • 1 3/4″ Diameter
    • 1 3/8″ Diameter – Fits Small Viper Scopes
    • Available in 2X, 3X, 4X, and 6X Magnification
    $89.99
  • In Stock

    The Charge Plus

    • Rechargeable Lithium battery & back up coin battery
    • Universal Fittings are Included: 1/4 – 28, 3/8 – 32, and 8 – 32
    • Rechargeable via Micro USB (cord included)
    • Lasts up to 4 hours on a single charge
    • 3 Brightness Settings – Low, Medium, and High
    • 3 Timer Settings – 2 Minutes, 5 Minutes, and Constant
    • 3 LED Color Settings – Blue, Red, and Green
    • Quiet, Vibration Absorbing rubber gear ties
    • Built in Memory to hold you settings

     

                   Note – This Bracket will only apply light to the side of the fiber, not the end. Please see below for more information.

    IMPORTANT INFORMATION ABOUT FIBER COLORS:

    If you’re looking to use all three LED colors to change the color of your pin, you will need to use either a clear or blue fiber. Both of these fibers will light up the color that is selected on the light (either red, green, or blue). However, it is important to note, that to do this, the LED light must be applied to the END of the fiber. Clear and blue fiber will NOT gather LED light if it is applied to the side of the fiber. Please ensure that your set-up has a way of applying light to the end of the fiber if you are looking to do this.

    If choosing clear fiber, it must be used with a sight light as it will not gather ambient light. Blue fiber will gather some ambient light and can also be used with a UV sight light (like “The Charge” rechargeable sight light) if just a brighter blue is desired.

    If using the Charge Plus with standard red or green fiber,  the light can be applied to the side of the fiber. The blue color LED setting works best for this application.

    $89.99
  • In Stock

    Stabilizer Weights

    • Steel Weights with 5/16″-24 Threads
    • Available in 3-1 ounce, 1-4 ounce, 3-2 ounce, and 1-8 ounce configurations
    • Matte Black Powder Coated Finish
    • Compatible with all Viper Stabilizers
    • Made in the USA
    • Available Custom Colors Upon Request (While Supplies Last)
    $19.99$29.99
  • In Stock

    Venom Series Lens Kit

    Easily install the lens of your choice using the Lens Kit for Venom Series Sights, Pit Viper, or Atrox with a Multi Pin Housing

    • Kit Includes: Lens Adapter, Retainer Ring and O Ring, and your choice of Viper Lens.

    Viper Ziess Coated Lens

    • 1 3/4″ Housing Diameter
    • Available Lens Power: 2x, 3x, 4x, 6x

    Lens Adapter and Retainer Ring

    • Machined from 6061 T6 Aluminum
    • Made in the USA

     

     

    • Not sure which Lens Kit to purchase? Please contact us at info@viperarcheryproducts.com.
    $109.99
  • In Stock

    Target Scope

    • Single Competition-Style Up-Pin Design
    • 1 3/4- or 1 3/8-inch Diameter Housing
    • Fully Machined 6061 T6 Aluminum Construction
    • All Stainless Steel Hardware
    • Zeiss-Coated Glass Lenses in 2X, 3X, 4X, or 6X
    • Pin Sizes: 0.010, 0.015, or 0.019
    • 24 inches of Fiber Optic Strand for Maximum Brightness
    • Complete Scope Includes Housing, Retainer Ring, and Lens.
    • Looking to add a Sight Light? Please contact us for more information.
    $139.99
  • In Stock

    Scope Cover

    PROTECT YOUR SCOPES AND SIGHTS
    – Collapsible Design
    – Made from water-resistant material
    – Available in Black
    – Size – 4″ X 4.75″

    $14.99
  • In Stock

    Viper Housing Rings (3 Pack)

    Easily install a colorful housing ring to any Venom Housing.

    • Venom Housing Rings come in packs of 3 with your choice of Green, White, Yellow, or a mix of all three colors.
    • IMPORTANT: This product is for the Venom Housing only.
    $9.99
  • In Stock

    Sight Tapes

    • Driver Sight Tape fits Short Drive, Pit Viper, and Atrox
    • Sidewinder Sight Tape fits Sidewinder and Sidewinder XL
    $15.00
  • In Stock

    Sidewinder

    • Available in a Single Aluminum Machined Style Up Pin, Single Stainless Steel Competition Style Up Pin, Double Up Pin, 3 pin and 5 pin
    • 2nd-Axis Adjustment
    • 2-inch Aperture
    • Delrin Bushings for Ultra Smooth Adjustment
    • 6061 T6 Construction
    • All Stainless Steel Hardware
    • 24-inch Fiber-Optic Strand
    • Pin Sizes: .010, .015, or .019
    • Threaded for an Optional Sight Light
    • Threaded for an Optional Lens
    • Looking To Add a Lens? Please follow this link for a Single Pin and Double Up Pin: https://viperarcheryproducts.com/product/lens-kit-retainer-ring-and-o-ring/
    • Looking To Add a Lens? Please follow this link for a 3 & 5 Pin: https://viperarcheryproducts.com/product/venom-series-lens-kit/
    • Standard Double Up Pin Fibers are the same size – green on top and red on the bottom. For custom orders please contact us at info@viperarcheryproducts.com.
    $169.99$229.99
  • In Stock

    VIPER VHS Hunting Stabilizers

    • Strong and lightweight 6061 aircraft grade aluminum construction
    • Each stabilizer includes 4oz machined steel weight
    • 2″ stainless front stud for superior weight stacking flexibility
    • Shock absorption
    • Sizes – 6″ , 8”, 10”, 12”
    $49.99$69.99
  • In Stock

    1″ Bubble Level

    • Bubble Level
    • Replacement
    • Fits 1.375″ and 1.750″ Viper Scopes, Sidewinders, and Single/Double Up Pin Housings.
    $3.99